Brookfield - Camera Programming
Introduction
Below are the standards for all Brook-field cameras. Please note that you will need to individually set these up to the standards below.
All Cameras Models
Step 1: Security Groups - NVR
Set these on all boxes you work on:
Group Name | Security Level | Username/Password | Description |
|---|---|---|---|
Brookfield-AD | Default | Set to BPR | Brookfield-AD |
Brookfield-Axis | Medium | Set to BPR | Brookfield-Axis |
Brookfield-Viewz | Default | admin/admin | Brookfield-Viewz |
Brookfield-AxisPVM | Medium | admin/admin | Brookfield-Axis PVM |
Step 2: Program on the Camera web GUI:
Setting | All BPR Cameras | Notes |
|---|---|---|
BPR Username/Password |
| Admin/root > Site Specific Mallcamz > BPR Standard password |
NTP | 10.100.10.230 (Secondary NTP: 10.101.10.230) | Make sure both are filled out (if applicable) |
DNS | 10.100.10.230 (Secondary DNS: 10.101.10.230) | Make sure both are filled out (if applicable) |
Gateway | {Network IP}.1 | (cam: 10.1.2.100) → (gateway: 10.1.2.1) |
IP address | Program to spec |
Step 3: Program on the NVR:
Setting | Fixed | PTZ | Notes |
|---|---|---|---|
FPS | 15 | 15 | |
Resolution | 1080p | 1080p | or as close as possible |
Bit Rate | Variable Bit Rate | Variable Bit Rate | VBR |
Recording | Record Always with Alarms | Always no Alarms | |
Security Groups | BPR Security Group | BPR Security Group | Make sure to add the BPR Security Groups to the NVR |
Camera Audio | Disable | Disable | |
Camera Retention |
Step 4:
Please ensure that the roles and VM are adjusted for the site. Use this guide: BP Enrolling a Camera to Victor (roles and VM) and Victor Unified Client 101